What is XTherma? It's a skin tightening treatment using Monopolar RF to create a more defined facial contour and firmer skin.

There was a period when many people started to notice that their faces looked different, even though they hadn't gained much weight. Your cheeks might start to sag slightly, your jawline might not be as sharp as before, your lower face might appear heavier in side photos, or the skin under your chin might not be as firm as it used to be.

These symptoms are the reason why many people start looking for help. Facial lifting device But the truth is, sagging skin or an undefined jawline isn't caused by a single factor. Some people develop it from sagging skin and tissues. Some people also have fat in their lower cheeks or under their chin. Some of them are related to facial structure. And many people have more than one problem happening at the same time.

Therefore, when choosing a skin tightening device, you shouldn't just consider which machine is more powerful or how many shots are needed, but rather start by identifying the main problems facing your face.

XTherma It is a power-based lifting device. Monopolar Radiofrequency, or Monopolar RF, has a frequency of 6.78 MHz. To generate controlled heat in tissues, stimulating collagen fiber remodeling and the process of new collagen formation. Collagen Remodeling The device supports a maximum power of 400W and has a system... Smart Temperature Cooling (STC) It works in conjunction with energy release to help control the temperature of the surface during the procedure. XTherma is therefore another option for those who want to focus on... Skin becomes firmer. The cheeks and lower face appear firmer. The facial features appear more defined. And treat sagging skin without surgery. However, the appropriate number of shots or how many are needed depends on each individual's facial features and tissue condition.

list of contents

Unclear facial contours: Is it due to "sagging skin" or "fat"? These two may look similar from the outside, but the care methods are different. If you're unsure about your main problem, you can send us frontal and side profile photos for an initial assessment to see if XTherma or another skin tightening device would be more suitable for your issue.

What is XTherma?

XTherma is a skin tightening device that uses Monopolar RF technology at a frequency of 6.78 MHz. To generate heat in the tissue, the surface has a cooling system to help control the temperature during the procedure.

When tissue is heated to an appropriate level, the existing collagen fibers respond to the heat, followed by a process of collagen repair and rearrangement in the post-treatment period. Therefore, the effects of XTherma are not fully apparent on the day the treatment is completed. Some people may feel the firmness of their skin from the very beginning, but the changes from collagen remodeling will occur gradually over time.

X-Therma is often considered in people who are concerned about...

The skin is starting to lose its firmness.
My cheeks are starting to sag.
The lower face looks heavier.
The facial features are not as sharp as before.
The skin under my chin is starting to lose firmness.
Need to take care of your collagen.
I want a non-surgical facelift.
I don't want long periods of downtime.

It's important to understand that XTherma isn't designed to transform everyone's face into a V-shape. The goal is to help the skin and tissues suitable for RF treatment appear firmer and tighter, while still maintaining each individual's existing facial features.

What is Monopolar RF?

The term RF, or Radiofrequency, is likely familiar to many when choosing a skin tightening device. But RF doesn't mean all devices will work the same way.

Monopolar RF It is a system with energy electrodes at the treatment head and a return pad as the other electrode, allowing RF current to travel through the tissue and generate heat from the internal resistance of the tissue. To explain it in a simple way. Ultrasound energy, such as Ulthera, focuses on delivering energy in targeted points at a chosen depth.

Monopolar RF focuses on generation and control. Heat area in tissue This is why XTherma and Ulthera Prime, although both used for skin tightening, do not feel exactly the same during treatment and the goals of the treatment.

How does XTherma work?

XTherma uses monopolar RF power at a frequency of 6.78 MHz, and the device supports a maximum power output of 400W. However, 400W refers to the maximum capacity of the device; it doesn't mean everyone will need to use the maximum power as well.

The settings during the process still need to be checked.

Area where it was done
Tissue thickness
Fat content
Skin condition
Feelings during treatment.
The goal to be solved.

Because different parts of the face are not the same thickness. The cheeks and the jawline are not the same. The area around the face and under the chin are not the same. Using the same energy level across the entire face may not be suitable for everyone.

Delivering energy to the tissue.

The treatment head delivers RF energy to the planned area. Energy is converted into heat within the tissue, with a cooling system working in conjunction with the surface.

Controlled Heating occurred.

The goal is to heat the tissue to a level suitable for treatment; it doesn't mean... “"The hotter, the better."” Because excessive energy doesn't always lead to better results, it's important to maintain a balance between energy, heat, comfort, and the anatomy of the area.

Collagen Remodeling after treatment

After tissues receive energy, the body gradually enters a repair and remodeling process. This is why the results of XTherma should be evaluated continuously after treatment, not just based on immediate "after" photos.

What types of XTherma heads are available? Which head is suitable for which area?

Another interesting feature of XTherma is that it comes with multiple treatment head sizes, because the areas around the eyes, cheeks, jawline, and body have different surface areas and tissue thicknesses.

Xtherma therefore has a whole set of heads. 4 sizes To allow for selection based on the area requiring care.

Large Facial Treatment Head – 5.0 cm²
Small Facial Treatment Head – 4.0 cm²
Eye Treatment Head – 0.25 cm²
Body Probe Head – 20.0 cm²

It doesn't mean that the largest head is best for every area, but each size is designed to suit different spaces and treatment placements.

Large Facial Treatment Head - 5.0 cm²

Face Tip 5.0 cm² It has a larger contact area than the Face Tip (4.0 cm²), allowing for greater coverage per shot. Suitable for large areas of the face, such as:

cheek
Lower Face
Face frame
Under the chin
throat

But a larger header doesn't mean every position has to use a 5.0 header. For areas with curvature, confined spaces, or variations in anatomy, a different head size might be more suitable. Therefore, the important thing is not just the number of shots, but... Choose a nozzle size that is appropriate for the area and distribute the shots to cover the actual area that needs correction.

Small Facial Treatment Head - 4.0 cm²

This head is designed for the face and neck area. Its size allows for more precise energy delivery to areas requiring greater flexibility than a larger head. It can be used for treatment on various areas of the face, with the doctor selecting the most suitable area and anatomy for each individual.

Eye Treatment Head - 0.25 cm²

This is the smallest tip, ideal for areas requiring precision and confined spaces, such as around the eyes. Because the area around the eyes has relatively delicate anatomy, the choice of head and energy level must be evaluated separately from performing procedures on the cheeks or lower face.

Body Probe Head - 20.0 cm²

This head has the largest contact area, designed for a wider body area than the face. For example, areas of the torso or parts of the body that require a lot of coverage.

XTherma's Smart Temperature Cooling system

When performing Monopolar RF, we want to generate heat in the tissue, but the temperature of the surface skin also needs to be controlled. XTherma therefore has a system... Smart Temperature Cooling Alternatively, STC works in conjunction with energy release. In one shot, the cooling system is divided into multiple stages.

Pre-cooling

Before delivering RF, a cooling process is used to help reduce the temperature of the surface skin.

RF + Cooling

During RF energy delivery, the cooling system also works in conjunction to help control the temperature of the skin area.

Post-Cooling

After the RF is released, there will be another cooling period.

According to XTherma product information, the STC system has integrated cooling. 7 cycles per shot: Pre-cooling (2 times), RF + Cooling (3 times), and Post-cooling (2 times). This system is part of a process that helps generate heat in the tissue while maintaining the comfort of the skin surface during treatment.

What are the benefits of XTherma?

XTherma's primary goal will be... Skin firmness, lifting, and collagen remodeling.

Therefore, it can be considered in problems such as:

My cheeks are starting to sag.
My skin is starting to feel less firm than before.
The lower face looks heavier.
The facial features are starting to become blurry.
The skin under my chin is starting to lose firmness.
I want to take care of sagging skin before it becomes too severe.
I want to stimulate collagen production.
I don't want surgery.
I don't want a long recovery period.

But before concluding whether XTherma is suitable or not, we need to identify the root cause of the problem first.

If the facial contour is unclear due to sagging.

Many people will notice from old photos that their jawline used to be more defined, but as time passes, the cheeks start to sag in the lower face. This may be due to skin and tissue laxity. Using Monopolar RF to tighten the tissue is therefore one option that can be considered.

If your facial contours are unclear due to fat.

Another scenario is when the skin isn't drooping significantly, but there's a lot of excess tissue in the lower cheeks or fat under the chin. Outwardly, it might appear similar to facial sagging, but the causes are different. If fat is the primary factor, simply increasing the number of shots using the skin tightening machine may not solve the entire problem.

If the facial structure is unclear.

Some people have a relatively short chin, an inconspicuous jawline, or naturally insufficient bone support. Even with skin tightening, their facial shape may not change as much as those whose primary problem is sagging. Therefore, a pre-procedure assessment is more important than starting with the question: “"How many shots do I need to take?"”

Is your face starting to sag, your jawline becoming less defined, or you have a double chin, but you don't know what's causing it? Please send frontal and side-view photos for initial assessment. We need to first identify the main problem. Skin, fat, or structure. Then, we'll see which treatment, XTherma or another, is more suitable.

Who is XTherma suitable for?

XTherma is suitable for consideration for people who are starting to feel that their skin and tissues are not as firm as before, and want to maintain skin firmness without surgery.

For example,

Her cheeks were beginning to sag slightly.
The lower face is starting to look heavy.
The facial features aren't as sharp as before.
The skin under my chin is starting to loosen.
I want my skin to look firmer.
I want to stimulate collagen production.
I want to start taking care of it before the sagging becomes too noticeable.
I don't want a long recovery period.
I like the gradual transformation and how it still feels like myself.

There's no need to wait until a certain age to assess it.

Because people of the same age can have both...

The skin thickness is different.
Different fat content.
Window shapes
Different levels of slack.
Bone support is different.

Therefore, judging whether XTherma is suitable or how many shots are needed based solely on "age" is insufficient.

Popular areas for XTherma treatment.

cheek

The cheeks are an area where many people start to notice changes relatively quickly. When the tissue starts to lose its firmness, the cheeks may appear slightly drooping, making the lower face look heavier. XTherma can deliver energy to the cheek area based on the thickness of the tissue and the facial shape of each individual.

Lower Face

The lower face is an area where people often worry about looking sagging or heavy. However, this area contains skin, fat, muscle, and structural components, so it's important to first identify the primary contributing factor before allocating energy accordingly.

Face frame and jawline

If your jawline was once quite defined but has recently started to sag, increasing tissue firmness can help to make your original facial contours more prominent. The goal isn't to make everyone have the same V-shaped face, but to help each person's original contours look neater and firmer.

Under the chin

The area under the chin is another area that needs careful differentiation. Sagging skin and fat. Some people have both issues simultaneously. If the primary problem is sagging skin, XTherma can be considered. However, if there is a significant amount of fat, other treatments may need to be considered as well.

throat

People who are beginning to worry about sagging skin on their neck can consider XTherma treatment on the neck as well as the face. However, as the treatment area increases, the number of shots needed will need to be assessed based on the actual area.

How many shots does XTherma need to perform?

"How many shots of XTherma?" is one of the most frequently asked questions, because when you see promotions, you usually see numbers like 400 or 600 shots. But if you ask... “"Which number is best?"” Actually, you can't answer based solely on numbers, because the ideal number also depends on...

Area to be worked on.
face size
Level of looseness
Tissue volume
Points to emphasize
Energy used
Shot distribution

Who is XTherma 400 Shots suitable for?

400 shots can be used to plan treatments for the face or key areas you want to emphasize in many cases, but it doesn't mean 400 shots will suit everyone. Those who want to focus only on the lower face are significantly different from those who want to treat their cheeks, jawline, under the chin, and neck.

Who is the XTherma 600 Shots suitable for?

As the area to be treated increases, the number of shots may need to be increased accordingly. A coverage of 600 shots can therefore be considered for patients requiring treatment of multiple areas, or for face and neck treatments, but it doesn't mean... 600 shots are always better than 400 shots. If the additional shots are not placed in the necessary areas, the results will not automatically increase accordingly.

How many shots are needed for a face and neck treatment?

If the entire face and neck are treated, the treatment area will be larger, so an assessment should be made based on that.

face size
Neck area
Level of looseness
Area to be emphasized

Rather than specifying that everyone must use the same amount for Face + Neck,

Does XTherma hurt?

Another question many people worry about before doing it is: Does XTherma hurt? During the procedure, you will feel heat because the primary mechanism of Monopolar RF is to generate heat in the tissue. Everyone's feelings are different. You might feel it at times.

lukewarm
Hot in bursts
Deep heat beneath the skin
Alternating with the cooling from the cooling system.

Areas with thin tissue or close to bone may feel different from areas of the cheek with more tissue. The level of feeling also depends on...

Pain Sensitivity
Treatment area
Energy level
Tissue thickness
Cooling
Techniques during the process

Therefore, pain should not be used as a measure of whether a treatment is effective or not. More pain doesn't mean better. The goal is to deliver energy levels that are appropriate for each individual's tissues and treatment goals.

When will XTherma show results?

After XTherma treatment, some people may feel a slight tightening or firmness of the skin immediately, but the results on the day of treatment are not the final result because the collagen remodeling process takes time. Therefore, it is recommended to view the results of XTherma as a timeline rather than comparing only before and after photos immediately after treatment.

Immediately after the procedure.

Some people might feel their skin is tighter or see slight changes in contour, but this isn't the final result yet.

Approximately 1 month

This is the period when you can start to closely monitor changes in skin firmness and quality.

Approximately 2-3 months

The remodeling process is still ongoing, so it's a good time to evaluate the overall results rather than just looking at the first day. If you want to take before-and-after photos to see the actual results, it's recommended to control the process.

corner
Camera distance
light
Expression
Hairstyle

To make them as similar as possible.

How long does XTherma last?

If you ask me... How long does XTherma last? There isn't one single answer for everyone. Because even after the treatment, the skin's aging process continues naturally. The time it takes for each person to see results can vary depending on several factors, such as:

age
Level of slack before treatment
Original skin quality and collagen.
Number and location of shots.
Lifestyle
Changes in weight
Exposure to sunlight
Skin care
Each person's aging process.

Therefore, it is not necessary to mandate that everyone repeat the process at the same time. It would be more reasonable to follow up and see how much the tightness has changed before scheduling the next maintenance.

What are the differences between XTherma and Ulthera Prime?

XTherma with Ulthera Prime This is a frequently asked question because both devices are used for skin tightening, but in reality, their energy levels are quite distinct.

XTherma

use Monopolar RF The main points considered are:

Skin Tightening
Skin firmness
Collagen Remodeling
Heat is generated in the tissue in an area.

Ulthera Prime

use Microfocused Ultrasound with Visualization or MFU-V The system allows for the selective delivery of energy to specific points at a predetermined depth, and real-time ultrasound visualization enables doctors to see tissue layers during treatment. Therefore, it is often used when the treatment goal focuses on lifting at a different level than RF. If you're torn between two devices, there's no need to start by asking... “"Which one is stronger?"” Let's start by looking at the main problem. Skin Tightening or Deep Lifting More than each other

In some individuals, Ulthera Prime and XTherma can be combined if they need to address problems at different levels.

What are the differences between XTherma and Oligio X?

Unlike Ulthera Prime, XTherma and Oligio X It belongs to the Monopolar RF group as well. Both systems use RF energy to generate heat in the tissue and stimulate collagen remodeling. But that doesn't mean all machines will work the same way. The details of each platform differ in terms of...

Energy release patterns
Treatment Mode
Tip
Cooling
Feedback System
Feeling during treatment.
Protocol used

Therefore, if you're choosing between XTherma and Oligio X, it's recommended to consider the tissue condition, the area of concern, and the treatment goal, rather than just the name of the device. Some people might be better suited to XTherma. Some people might be better suited to Oligio X. And in some cases, the desired result may not depend on changing the device, but rather on tailoring the treatment to the specific problem.

How much does XTherma cost?

XTherma prices vary depending on the number of shots, the area where the treatment is performed, and current promotions. However, when comparing prices, it's recommended to check more than just the final price.

1. How many shots did you get?

400 and 600 shots provide different coverage areas. If the two packages have different prices, you should check if the number of shots is the same.

2. Where should it be done?

Some packages may focus on specific areas.

Lower Face
Jawline

While another package might cover it.

Cheek
Lower Face
Under Chin
Neck

Even with the same number of shots, the area and energy distribution can differ.

3. How was the shot positioned?

A large number of shots doesn't help much if the shots aren't in the area that needs correcting. Therefore, it's important to know what the treatment plan focuses on and why.

4. Is XTherma suitable for our problem?

This is the most important point. If the main problem isn't something Monopolar RF is best suited for, even a good promotional price might not be the most worthwhile treatment for you.

Check the latest XTherma prices and promotions. Promotions may vary from time to time. You can inquire about current prices or send a photo for us to help assess which areas should be focused on and approximately how many shots will be needed.

Where is the best place to get XTherma treatment? What should I consider before choosing a clinic?

Search time Where is the best XTherma location? The first thing many people often compare is the price and the number of shots. These two can be viewed, but they shouldn't be the complete information needed to make a decision. Because even with the same model of machine and the same number of shots, different treatments can be applied.

Before choosing a clinic, it's recommended to check that:

Is a facial assessment performed before the procedure?
Is it possible to identify the cause of the looseness?
Can you explain why you chose this number of shots?
The shots were divided according to the problems in each area.
Adjust the energy based on anatomy and tissue thickness.
We don't use the same protocol for everyone.
Feelings and responses were monitored during the process.
There are before and after photos taken from similar angles and lighting.
Explain the limitations of XTherma.
Other treatments can be recommended if XTherma is not the best option.

Because good consultation shouldn't start with... “"Which machine should I sell?"” But we should start with... “"What is the real problem with this face?"”

View this post on Instagram

A post shared by Fresh Code Clinic (@freshcodeclinic)

Dr. Krit is a trainer and speaker for both XTherma and XTriple.

The effectiveness of a skin tightening device doesn't depend solely on the device itself. Another important aspect is assessing whether... Which areas should energy be applied to, which areas should be avoided, and which type of energy is best suited for each problem?

At Fresh Code Clinic Dr. Krit She is one of the doctors who oversees facelift procedures and plays a role as... Trainer & Speaker for both XTherma and XTriple. Working with both technologies means that facial assessment time isn't solely focused on "how many XTherma shots should I get?"“ But first, let's look at the overall picture and see where each person's main problem lies. If the primary issue is skin and tissue firmness, XTherma, a monopolar RF treatment, might be a more suitable solution. However, for some people who want to focus on lifting at a different depth, ultrasound energy like XTriple may be another option. And in some cases, it may be appropriate to combine two energies to address problems at different levels. This is why people come in with the same problem, such as... “"The facial features are blurry."” Therefore, they don't necessarily need to have the same treatment plan.

Some people have laxity as their primary characteristic. Some people also have fat. Some people have rather thin faces. And some people may need to look at structure rather than just a lifting device. Understanding both RF and Ultrasound helps in choosing the energy level based on the actual problem, rather than choosing based solely on the machine name.

XTherma at Fresh Code Clinic focuses on tailoring treatments according to anatomy.

At Fresh Code Clinic, there is no requirement that everyone undergoing XTherma must receive the same number of shots or follow the same protocol. Before planning any treatment, we will first identify the main problems facing each face.

If the main problem is sagging skin and tissues.

XTherma can be placed to focus on skin tightening and collagen remodeling in appropriate areas. The areas of focus may vary from person to person, such as the cheeks, lower face, jawline, or under the chin.

If you have a lot of fat in the lower face area.

It's also necessary to assess how much of the feeling of a heavy face or an undefined jawline is due to fat. Because adding RF alone does not necessarily solve every element of the problem.

If your face is relatively thin.

People with less facial volume should not use the same protocol as those with more volume in the cheeks and lower face. Therefore, the placement and energy levels must be chosen to suit their actual facial features.

If you require a different level of lifting.

Some people may be more suitable for ultrasound energy, or ultrasound may be combined with RF treatment depending on the treatment goal. Therefore, the goal is not to achieve the highest number of XTherma shots. But it depends. Where is each shot placed, and what problem is it solving?

Things to know before undergoing XTherma treatment.

XTherma is a non-surgical treatment, but it is still a procedure that uses RF energy. Before undergoing the procedure, you should inform your doctor about your health history and any previous facial procedures you have had done. Especially if...

Is there any wound or inflammation in the area to be treated?
I have a pre-existing medical condition.
There are electronic devices implanted in the body.
There are medical materials or equipment in the treatment area.
I am pregnant.
I recently had an injection in the same area.
I just had thread lifting done.
I just made a different type of power device.
Have you ever had surgery on your face or neck?
There is a sensory abnormality.

It doesn't mean it's impossible in every case. However, this information can affect the assessment of suitability and the recommended waiting period before proceeding.

Frequently Asked Questions about XTherma

Is XTherma any good?

XTherma is one of the options in the Monopolar RF group for those who want to address skin firmness, sagging, and collagen remodeling. But that doesn't mean it's the best for everyone. If the primary problem stems from fat, structure, or laxity to a level suitable for other energy types, the treatment plan may differ.

Does XTherma help to slim the face?

If you feel your face looks wider or your jawline is less defined, it may be due to sagging tissue. As the skin and tissues tighten, the contour may appear cleaner and clearer. But XTherma doesn't change bones, muscles, or make everyone's face equally smaller.

Does XTherma help reduce a double chin?

We need to determine the cause of the double chin. If the skin under your chin is starting to sag, tightening it can help improve the appearance of that area. However, if there is a lot of fat under the chin, you may need to consider treatments that address the fat as well.

Is XTherma 400 shots enough?

It depends on the area and the problem to be emphasized. For some people, sufficient coverage might be enough for the main areas of the face, while those needing to care for multiple areas or the face and neck may require more coverage.

Is XTherma 600 shots better than 400 shots?

unnecessary More shots provide more coverage area, but that doesn't automatically mean better results. What we need to look at together is: Number of shots + Location + Energy + Anatomy

Does XTherma hurt?

During the procedure, you will experience rhythmic warmth or deep heat, accompanied by a cooling sensation. The sensation varies from person to person, including different areas of the face.

Does XTherma show results after just one treatment?

Changes can begin to be seen after a single treatment in suitable individuals. However, the effects of collagen remodeling develop gradually after the procedure, so it shouldn't be fully assessed from the first day alone.

How many days does XTherma take to show results?

Some people may feel their skin tightening from the first few weeks. However, changes in collagen remodeling should be monitored over the following weeks and continuously evaluated over approximately 1–3 months.

How long does XTherma last?

The time it takes to see results varies from person to person. The results depend on age, skin quality, degree of laxity, treatment plan, lifestyle, and the aging process after treatment. Therefore, it is suitable for follow-up and then evaluating individual maintenance.

Does XTherma make your face look thinner?

Xtherma treatment should prioritize energy placement based on anatomy, especially for individuals with relatively thin or low-volume faces. The idea that... “"The more you shoot, the better."” If you are concerned about sunken cheeks or a thin face, please mention it during the assessment so that the treatment can be positioned appropriately.

Does XTherma make the skin thinner?

The goal of XTherma is not to thin the skin. The primary mechanism involves the controlled generation of heat in the tissue to stimulate collagen regeneration. The energy setting and location should therefore be tailored to each individual's skin condition.

Between XTherma and Ulthera Prime, which is better?

There is no single answer for everyone. XTherma Monopolar RF is ideal for planning skin tightening and collagen remodeling treatments. Ulthera Prime Using the MFU-V, it can project power as a point at a specified depth, with real-time visualization.

You should choose based on the problem you want to solve rather than the machine's name.

Between XTherma and Oligio X, which one is better?

Both devices belong to the Monopolar RF group and have similar skin tightening goals. However, the details of the platform, cooling, mode, and treatment protocol differ. Therefore, it's important to consider which device and approach are best suited to each individual's tissue and goals.

Do I need to rest my face after XTherma treatment?

Generally, it is a non-invasive treatment, so there are no scars or recovery periods like with surgery. However, some people may experience redness, warmth, slight swelling, or sensitivity to touch in the initial stages. If you experience any unusual symptoms or your condition does not improve, please contact the clinic for further evaluation.

In summary, who is XTherma suitable for?

If you start to feel that... My cheeks aren't as plump as they used to be. The lower face is starting to look heavy. The facial features are blurry. Or is the skin under your chin starting to sag? And if you want to maintain skin firmness without surgery, XTherma is one option you can consider.

XTherma uses energy. Monopolar RF 6.78 MHz To generate heat in the tissue and stimulate collagen remodeling, along with a cooling system to help control the skin temperature during the procedure. But before deciding that... Should I do XTherma?
How many shots are needed? Which package should I choose? I want to get a clearer picture first of what the facial problem is.

Some people have... Loose skin and tissues. As a principle. Some people have... fat Join in. Some people need it. Lifting at different levels. And some people have issues. Facial structure It is an important part. Therefore, some people are better suited to XTherma. Some people might be better suited to Oligio X. Some people might be better suited to Ulthera Prime or XTriple. And some people may be better suited to a combination treatment plan rather than choosing just one machine. Because ultimately, choosing a skin tightening device doesn't necessarily have to start with... “"Which one is the most powerful?"” But we should start with... “"Where do our problems lie, and what type of energy best addresses those problems?"”

Consult with a specialist about your skin problems.

Still unsure if XTherma is right for your face? If you're undecided between XTherma, Oligio X, Ulthera Prime, or XTriple, you can start by sending frontal and side profile photos for an initial assessment, or visit Fresh Code Clinic for a evaluation first. Once we know in advance where the main problem comes from. Skin, fat, or structure. This will allow you to choose the device, number of shots, and treatment plan that best suits your face.

💚Add LINE @freshcodeclinic
📍19 Sukhumvit Soi 5, BTS Nana Exit 1 (Parking available)
📞083-626-4264
🕝Open daily 11:00 AM – 08:00 PM